Forum Replies Created
- Replies
-
- September 20, 2012 at 12:56 pm
- in reply to: Any Cudaheads running a 1×9 setup?
Thanks for reply …Had the work stand outside last night so lighting was not great,will do a real check during day but from looking at the outside of frame it looks GOOD which was the reason it surprized me to pull BB and see rust…unless this is common on 23 + year old steel frames to have a bit of rust to them…last time I took a steel frame apart this bike would not have been built or thought of.- September 20, 2012 at 3:15 am
- in reply to: Any Cudaheads running a 1×9 setup?
Pulled BB out tonight and found where water had sat and rust was on the BB…think I might need to do what Mix did and clean the inside and spray in stuff to protect it…I said it was a cheap beater build but for the future life of the frame I guess I should do it.- September 19, 2012 at 5:05 pm
- in reply to: 95 Dos Equis XX Team $400 (Gwinnett, DaculaAtlanta)
HEY D….. You can not say that their parts do not have a nice supple bounce to them on up and down movements….well except for the knockoffs…- September 19, 2012 at 3:13 pm
- in reply to: My daughter’s 1995 12" A2Z
At the yacht company I had worked at we used Finesse for final finish….Thanks Mix with reminding me about that stuff..Think I will grab some…Not sure if Pep boys still around here,have not seen them in sometime but it must be at other auto suppy shops or the marine suppy…- September 19, 2012 at 3:02 pm
- in reply to: Any members in New Jersey?
So Cool that another kid is following the Cuda path,hope to see pictures of the new ride when it shows up!- September 19, 2012 at 12:53 pm
- in reply to: 95 Dos Equis XX Team $400 (Gwinnett, DaculaAtlanta)
Plus they know men are simple and just show NICE parts in their advertisements
- September 19, 2012 at 12:43 pm
- in reply to: My daughter’s 1995 12" A2Z
O MAN….if you had my son and plan to push the final parts to Thanksgiving….YOU would find tires and pedals removed from one of your bikes. If you can grab some pictures of you guys riding so we can see the birth of a new little Cuda and the rider…plus it would just be nice to see some riding shots period,bonus prize…ENJOY!!- September 18, 2012 at 4:51 pm
- in reply to: My daughter’s 1995 12" A2Z
Looks very nice,thought it was going to be a 1 x ? change mind or am I thinking of different bike…………..she should love it.. sweet little bike- September 18, 2012 at 4:21 pm
- in reply to: Lance vs USADA/UCI/FDA/etc. vs Cycling
Even if they were not advanced enough back then as far as I know they still have blood samples…test again and I bet they get the same outcome..They just have wood to take his title away…- September 17, 2012 at 8:39 pm
- in reply to: ’94 A2MS budget build
Real close to being a done deal and out in the woods where she belong.- September 17, 2012 at 12:38 pm
- in reply to: 95 A2Z 12"14" $200 (PlymouthNew Hampshire)
Clean simple ride….if you take the recliner off of it!- September 16, 2012 at 7:13 pm
- in reply to: Any members in New Jersey?
Ha haha…nasty looking pic there…You ever use a roller trainer or a three section staff,the pain goes away after a bit of time but the memeories last forever….I think…I have been knock out a few times.- September 16, 2012 at 4:56 pm
- in reply to: Any members in New Jersey?
I would give it a try atleast once,my bet is I would end up on the ground but laughing the whole time in doing so.- September 14, 2012 at 2:29 am
- in reply to: New Barracuda Aussie Dos Equis XX Shirt Small $22.40 BIN
I am pretty sure who ever bought it is a die hard Cuda fan…..so I would say that person is GOOD in many ways!- September 14, 2012 at 12:50 am
- in reply to: New Barracuda Aussie Dos Equis XX Shirt Small $22.40 BIN
Well I made it home from work and hop on to the forum to see what was wrote….went right to ebay to find out somebody bought it in the short time from when I was looking at it at work….O well….It would have fit me..a little tighter than when I was younger but I still could have worn it…